How to care and maintain aluminum rolling shutter doors to ensure their performance?

Aluminum rolling shutter doors are widely used in modern buildings due to their durability, safety and aesthetics. Proper care and maintenance not only ensures the performance of the rolling shutter door, but also extends its service life. Here are some key care and maintenance steps to help you keep your aluminum rolling shutter door in top condition.

1. Regular cleaning
Regular cleaning is the basis for maintaining aluminum rolling shutter doors. Use a soft cloth and warm water to clean the door surface and rails, and regularly clean the dust and debris inside the door. Avoid using hard objects or chemical cleaners to avoid scratching or corroding the surface of the door panel
. Cleaning frequency is recommended to be performed at least once a quarter

2. Lubrication maintenance
The operation of aluminum rolling shutter doors depends on smooth rails and racks. Regularly apply lubricating oil to the rails and racks to ensure smooth opening and closing of the door. At the same time, regularly check the door’s motor and transmission system to ensure that they are working properly
. The frequency of lubrication depends on the specific usage. It is usually recommended to apply lubricant once every six months.

3. Check the parts
Regularly check the various parts of the aluminum rolling door, such as springs, guide rails, racks, door panels, etc. for damage or looseness. If problems are found in time, they can be repaired in time to avoid major losses caused by minor faults.

4. Adjust the tension of the door curtain
The tension of the door curtain of the aluminum rolling door should be moderate. Too tight or too loose will affect the operation of the door. Check the tension of the door curtain regularly. If it is found to be inappropriate, it needs to be adjusted.

5. Pay attention to the safety of the electrical system
The electrical system of the aluminum rolling door is the key to its normal operation. During the maintenance process, you should pay attention to check whether the electrical circuit is intact, whether the switch is flexible and reliable, and whether the motor is running normally. If any abnormality is found, you should contact professionals for repair in time to ensure the safe and stable operation of the electrical system.

6. Follow the usage specifications
In addition to regular maintenance, following the usage specifications is also the key to extending the service life of the aluminum rolling door. Avoid any operation when the rolling door is running, such as crossing, touching, etc.
At the same time, pay attention to the safety under the rolling door, avoid stacking sundries or placing children to play

7. Check the remote control and buttons regularly
Regularly check whether the remote control and buttons of the rolling door are intact and effective, to avoid the rolling door not being able to operate normally due to remote control failure or button damage

8. Report the fault in time
If the rolling door is found to be operating abnormally or faulty, stop using it immediately and contact professionals for repair. Do not disassemble or repair it by yourself

Through the above care and maintenance steps, you can ensure the performance of the aluminum rolling door and extend its service life. Remember, regular care and maintenance are the key to keeping the rolling door running stably for a long time.