Home Categories Send inquiry

How to change sliding door rollers australia


Sliding doors are a great addition to any home, providing easy access to outdoor spaces and allowing natural light to flood in. However, over time, the rollers on these doors can wear out, causing them to stick and become difficult to open and close. In Australia, our homes often have to endure extreme weather conditions, so it’s important to know how to replace your sliding door rollers to keep them running smoothly. In this guide, we’ll walk you through the steps to replace your sliding door rollers in Australia, ensuring your door once again slides open and closed easily.

sliding door rollers

Step 1: Gather your tools and supplies
Before you begin, make sure you have all the necessary tools and supplies on hand. You’ll need a screwdriver, a set of replacement sliding door rollers (make sure to measure your existing rollers to make sure you get the correct size), a putty knife, a hammer, and a piece of wood.

Step 2: Remove the sliding door
Start by lifting the sliding door up and tilting the bottom toward you. This will disengage the door from the track so you can lift it out of the frame. Be sure to have someone assist you with this step, as sliding doors can be heavy and difficult to operate.

Step 3: Remove the old roller
Once the door is removed, use a putty knife to pry the old rollers out of the bottom of the door. If they are stuck, you may need to use a hammer and a piece of wood to gently knock them out. Be careful not to damage the door frame when doing this.

Step 4: Install the new roller
After removing the old roller, you can install the new roller. Simply place the new rollers into the slots on the bottom of the door, making sure they are flush and secure. Push them gently to make sure they seat correctly.

Step 5: Reinstall the sliding door
Carefully lift the sliding door back into place, making sure the rollers engage the tracks. After placing the door back on the frame, test it to make sure it slides smoothly. If not, you may need to adjust the height of the roller using the screws provided.

Step 6: Adjust as needed
If the door doesn’t slide smoothly, you may need to make some adjustments. Use a screwdriver to raise or lower the height of the rollers until the door moves easily.

Step 7: Maintain your sliding door rollers
Once you have successfully replaced your sliding door rollers, it is important to maintain them well. Clean the tracks and rollers regularly to prevent dust and debris from causing them to stick. Also, consider applying a silicone-based lubricant to the rollers to keep them moving smoothly.

Replacing sliding door rollers in Australia doesn’t have to be a difficult task. With the right tools and a little know-how, you can keep your sliding doors looking their best, even in the toughest conditions. By following these steps and performing regular maintenance, you can ensure that your sliding door will continue to provide easy access and beautiful views for years to come.