Home Categories Send inquiry

how to remove screen from sliding door


Sliding doors are a popular choice for many homeowners because they provide easy access, enhance natural light, and connect with the outdoors. However, maintaining your sliding doors involves occasional cleaning and repairs. If you want to remove a screen from your sliding door, this blog post will guide you through the process with simple steps and handy tips.

Step 1: Gather your tools

Before you begin, make sure you have the necessary tools on hand. You’ll usually need a flat-blade screwdriver, pliers, a utility knife, and a pair of gloves.

Step 2: Evaluate the screen pinning mechanism

Different sliding doors have different mechanisms to hold the screen in place. The most common types include spring rollers, latches, or clips. Examine your sliding door carefully to determine the specific method used.

Step 3: Remove the screen

For a spring roller mechanism, start by locating the adjustment screw on the bottom or side of the door frame. Turn the screw counterclockwise to release the tension on the roller. Gently lift the screen frame off the tracks and lower it to the floor.

If your sliding door has latches or clips, use a flat-blade screwdriver or your fingers to find and release them. Lift the screen frame to separate it from the track. Please be careful not to bend or damage the screen when removing it.

Step 4: Remove the screen frame

Most screen frames are held in place with retaining clips. Locate these clips on the sides or top of the frame and carefully pry them open with a flat-blade screwdriver. After releasing the clips, remove the screen frame from the door.

Step 5: Remove the splines

Check the edges of the screen frame to locate the spline, which is a soft line that holds the screen material in place. Use a utility knife or a pair of pliers to carefully lift one end of the spline out of the groove. Work slowly around the frame, removing the spline completely.

Step 6: Remove damaged screen material

If your screen is torn or damaged, now is the perfect time to replace it. Gently pull the old screen material out of the frame and discard. Measure the dimensions of the frame and cut a new piece of screen material to fit.

Step 7: Install new screen material

Place the new screen material over the frame, making sure it covers the entire opening. Starting at one corner, use a flat-blade screwdriver or roller to press the screen into the groove. Continue this process along all sides until the screen material is firmly in place.

Step 8: Reinstall the screen frame

Once the new screen is properly installed, place the screen frame back into the door rails. Insert the retaining clip and snap it tight to hold it in place.

Removing a screen from your sliding door can be a simple process if you follow these simple steps. Remember to use caution, especially when handling screen materials and using tools. By taking the time to remove and replace your sliding door screens, you can keep them in good condition and enjoy uninterrupted views of the outdoors.

sliding door shades