Home Categories Send inquiry

how to replace sliding door rollers


Sliding doors are a popular choice among homeowners for their modern aesthetic and space-saving features. However, the rollers on these doors can wear out over time, making it difficult to open or close them smoothly. In this blog post, we’ll guide you through the process of replacing sliding door rollers to make sure your door runs perfectly again.

Step 1: Gather Necessary Tools and Replacement Parts
Before you start, make sure you have all the tools and replacement parts you need for the job. You’ll need a screwdriver, pliers, hammer, pry bar, putty knife, replacement rollers, and lubricant.

Step 2: Safely remove the sliding door
First carefully remove the sliding door from the track. Locate the adjustment screws on the bottom of the door; these are usually covered by a plastic cover. Loosen the screw with a screwdriver and adjust to the highest position. Then, lift the door firmly but gently to remove it from the track. Be extra careful as sliding doors can be heavy.

Step 3: Remove the Old Roller
Check the bottom edge of the door for old rollers. Depending on the type of door, you may need to remove the plastic or metal strip that covers the rollers. Use a putty knife or pry bar to remove this strip, exposing the rollers underneath. Once exposed, use pliers or a screwdriver to carefully remove the setscrew or clip holding the roller in place. Note the orientation and position of the old roller before completely removing it.

Step 4: Install the New Roller
Take a new replacement roller and make it exactly like the old one. Secure them in place with set screws or clips. Make sure the scroll wheels are properly aligned and move freely. Also, apply a lubricant designed for sliding door rollers to ensure smooth operation.

Step 5: Reinstall the Sliding Door
Once the new rollers are in place, the sliding door can be reinstalled. Lift the door and place the rollers in the tracks. Lower the door onto the track and make sure it is in place. Adjust the screws on the bottom of the door to achieve the desired height and alignment. Test the movement of the door to make sure it slides smoothly along the track.

Step 6: Make Final Adjustments
After the sliding door is back in place, check for any remaining issues. If needed, small adjustments to the wheel height or alignment can be made to refine the sliding action. Keep in mind that some doors may have extra adjustment screws or mechanisms on the sides that can help with alignment.

By following these step-by-step instructions, you can easily replace sliding door rollers and restore smooth function to your sliding door. Regular maintenance and lubrication will help extend the life of your door rollers, minimizing the need for future replacements. Enjoy the easy glide of sliding doors and the added convenience it brings to your space!

bunnings sliding door rollers