How to reverse reliabilt sliding door

Reliabilt sliding doors are a popular choice for many homeowners due to their stylish design and durability. However, if you want to change the direction in which your door slides, it can seem like a daunting task. But don’t be afraid! In this blog, we will guide you through the easy process of reversing your Reliabilt sliding door.

Step 1: Gather your tools
Before you begin the process of reversing your sliding door, make sure you have all the necessary tools on hand. You’ll need a screwdriver, pliers, a rubber mallet, and some lubricant to ease the door’s movement.

Step 2: Remove the plug and existing hardware
Start by removing the plug from the existing side of the door. Unscrew the plug with a screwdriver and gently pry it open. Next, remove any existing hardware on the door, such as handles and locks.

Step 3: Remove the door from the track
Carefully lift the door off the track by tilting it upward and then pulling toward you. It is recommended to get a helper to complete this step as sliding doors can be heavy and cumbersome to operate on your own.

Step 4: Readjust the scroll wheel
Once the door is removed, it’s time to readjust the rollers. Use a screwdriver to loosen the adjustment screw located at the bottom of the door. Once the screws are loose, use a rubber mallet to knock the rollers up and out of the door. Turn the door over, reinsert the rollers, and tighten the adjustment screws into place.

Step 5: Reinstall the door
Once you’ve readjusted the rollers, you’re ready to reinstall the door. Tilt the door slightly and insert the rollers into the tracks. Once in place, carefully place the door back onto the track, making sure it’s securely fastened.

Step 6: Reconnect the hardware
Once the door is back in place, reinstall any hardware that was previously removed. This includes handles, locks and any other accessories. Make sure everything is securely fastened and functioning properly.

Step 7: Test the Door
After completing the reversal process, the door must be tested to ensure it slides smoothly in the new direction. Apply some lubricant to the tracks and rollers to help them move. Open and close the door a few times to check for any resistance or issues.

Congratulations! You have successfully reversed your Reliabilt sliding door. By following these simple steps, you can effortlessly change the direction of your door slide, giving your space a whole new look and feel.

All in all, reversing a Reliabilt sliding door may seem like a daunting task, but with the right tools and clear guidelines, it can be a simple process. By following the steps outlined in this blog, you can easily change the orientation of your sliding doors and enjoy a refreshed space in no time.