Safety regulations for the use of industrial sliding doors in the electronics industry
Introduction
As an efficient and energy-saving industrial door product, industrial sliding doors are widely used in the electronics industry. Their safety is directly related to the safety of personnel, equipment and goods. In order to ensure the safe use of industrial sliding doors in the electronics industry, a series of strict safety regulations need to be followed.
I. Performance requirements of industrial sliding doors
1. Wind resistance
Industrial sliding doors should have good wind resistance and be able to withstand a certain wind pressure without deformation or damage. According to the JG/T 353-2012 standard, the wind pressure resistance of the door leaf should meet the relevant requirements to ensure normal operation under severe weather conditions.
2. Thermal insulation performance
The thermal insulation performance of industrial sliding doors should meet certain standards to reduce energy consumption. The thermal insulation material should meet the requirements of QB/T 3806, and its density should not be less than 42kg/m³.
3. Sound insulation performance
The sound insulation performance of the door leaf should not be lower than the requirements of Level 1 in GB/T 8484-2008 to reduce the impact of noise on the working environment.
II. Configuration of safety devices
1. Wire rope break protection device
Industrial sliding doors should be equipped with wire rope break protection devices. When the wire rope breaks, the protection device should be able to prevent the door leaf from sliding down by no more than 100mm.
2. Torsion spring break protection device
Industrial sliding doors using torsion spring balance should be equipped with torsion spring break protection devices. When the torsion spring breaks and loses its balance, the protection device should be able to prevent the door leaf from sliding down by no more than 100mm.
3. Counterweight balance protection device
Industrial sliding doors using counterweight balance should be equipped with anti-fall protection devices. When the counterweight balance system loses its balance, the protection device should be able to prevent the door leaf from sliding down by no more than 100mm.
4. Guide rail closure
The side of the guide rail within a height of 2.5m should be closed to prevent personal injury when the door leaf is running.
5. Anti-roller finger pinching protection device
The roller running in the guide rail should be equipped with a roller finger pinching protection device.
6. Braking device
The braking device of the electric sliding door should be reliable and should be able to respond to the braking signal immediately during operation.
7. Emergency manual function
The electric sliding door should be equipped with an emergency manual function and interlocked with the electrical control device; the door leaf can be opened and closed manually during a power outage.
8. Safety sensor
The electric sliding door should be equipped with a safety sensor. When an object triggers the safety sensor during the downward movement of the door leaf, the door leaf should stop running.
III. Installation and maintenance
1. Installation specifications
The installation of industrial sliding doors should be carried out in strict accordance with relevant standards and specifications to ensure the stability and safety of the door body. During the installation process, attention should be paid to the coordination between the door panel and the guide rail and torsion spring to avoid safety hazards caused by improper installation.
2. Maintenance
Maintain the industrial sliding door regularly, including cleaning, lubrication, and checking the wear of parts. After every 5,000 operations, a wear test should be carried out, and cleaning, lubrication and maintenance work should be carried out.
IV. Operating procedures
1. Operator training
Operators should undergo professional training, be familiar with the performance and operation methods of industrial sliding doors, and master the response measures in emergency situations.
2. Safe operation
During operation, ensure that the door leaf runs smoothly and avoid sudden start or stop. It is strictly forbidden to repair or adjust the door leaf while it is running.
3. Emergency handling
When a fault or emergency occurs, the operation should be stopped immediately and appropriate emergency measures should be taken, such as using the emergency manual function.
V. Regulations and standards
1. JG/T 353-2012
This is the industry standard for industrial sliding doors in China, which stipulates the terms and definitions, classifications, codes and markings, general requirements, requirements, test methods, inspection rules, etc. of industrial sliding doors.
2. Other relevant regulations
Depending on different countries and regions, there may be other relevant regulations and standards, such as the EU CE certification. In the international market, companies need to ensure that their products comply with local safety regulations and standards.
VI. Conclusion
The application of industrial sliding doors in the electronics industry needs to strictly comply with relevant safety regulations to ensure that their performance, safety devices, installation and maintenance, operating procedures, etc. meet the standard requirements. By following these regulations, the safety of industrial sliding doors can be effectively improved, the safety of personnel and equipment can be guaranteed, and the market competitiveness of enterprises can be enhanced.