Home Categories Send inquiry

how to install roller shutter garage door


Installing a roller garage door is an excellent way to enhance the security and functionality of your garage. Roller garage doors are becoming more and more popular with homeowners for their durability, convenience, and aesthetics. In this blog, we will provide a comprehensive step-by-step guide on how to install a roller garage door, ensuring you a smooth and efficient installation process.

Step 1: Gather Necessary Tools and Equipment
Before starting, make sure you have all the necessary tools and equipment. These include drills, screws, levels, tape measures, ladders, and shutter kits, often with detailed instructions. Having everything ready can save you time and prevent any delays in the installation process.

Step 2: Measure and Prepare the Opening
Use a tape measure to measure the width and height of the garage door opening. Once your measurements are complete, mark the desired door height on the inside of the opening. Next, consider headroom and make sure it meets the manufacturer’s recommendations. Also, make sure there is enough space on both sides of the track system opening.

Step 3: Assemble the Roller Door
Carefully unpack and assemble the roller shutter according to the manufacturer’s instructions. This usually involves attaching hinges and brackets to the door section. Be sure to double check the instructions to ensure proper alignment and proper assembly.

Step Four: Install Rails and Brackets
Place the rails vertically on either side of the garage door opening, making sure they are plumb. Follow the instructions provided to secure the rails with screws or bolts. Install the brackets to the rails periodically, keeping the spacing even.

Step 5: Install the Door Curtain onto the Reel
Slide the door curtain onto the roller shaft, making sure it is centered and level. Secure the shade to the shaft using the bolts provided. Roll the curtain up and down slowly several times by operating the manual or electric mechanism to ensure smooth operation.

Step 6: Install the Roller Door Assembly
With the help of a friend or family member, lift the shutter assembly and carefully lower it into the rails. Make sure the door is level and aligned with the opening. Secure the brackets securely to the frame with screws or bolts.

Step 7: Testing and Adjusting the Roller Shutter
Test the operation of the shutter door by opening and closing it several times to ensure that the shutter moves smoothly along the rails. If necessary, adjust the tension of the spring or consult the manufacturer’s instructions to fine-tune the operation of the door.

By following this step-by-step guide, you can successfully install a roller garage door yourself. However, it’s important to remember that the installation process may vary depending on the manufacturer and specific door model. If you experience any difficulty or are unsure of any steps, it is recommended to seek professional help. Remember that proper installation is essential to ensure the longevity and optimal function of your rolling garage door.

roller shutter garage doors